|
GeeK
Registrado em: Sep 2007
Localização: Panamba City - RS
Mensagens: 2.544
|
pequena pergunta. colisão de recursos. kernel 2.6.32.2
Desde o omnislash 9 tenho notado um erro durante o boot. não chega a parar o início, mas eu fico sem os sensores do amd-k8 no lm-sensors.
Citação:
pci 0000:01:07.0: BAR 6: address space collision on of device [0x
dbfc0000-0xdbfdffff]
|
e alguns errinhos e mensagens, agora que vi, no dmesg.
Citação:
Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.1 (root@ilkyest) (gcc version 4.3.2 (Debian
4.3.2-1.1) ) #1 SMP Thu Dec 17 18:18:47 UTC 2009
[ 0.000000] Command line: root=/dev/sdc2 ro apm=off acpi=on quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000bffee000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] Malformed early option 'acpi'
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) =
=> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) =
=> (reserved)
[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffb0000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] RAMDISK: 37da5000 - 37fef99f
[ 0.000000] ACPI: RSDP 00000000000fb770 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bffb0100 00054 (v01 A_M_I_ OEMXSDT 12000823 M
SFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffb0290 000F4 (v03 A_M_I_ OEMFACP 12000823 M
SFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffb05d0 067D9 (v01 A0864 A0864000 00000000 I
NTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffbe000 00040
[ 0.000000] ACPI: APIC 00000000bffb0390 00080 (v01 A_M_I_ OEMAPIC 12000823 M
SFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffb0410 0003C (v01 A_M_I_ OEMMCFG 12000823 M
SFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffbe040 00064 (v01 A_M_I_ AMI_OEM 12000823 M
SFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffb6db0 00038 (v01 A_M_I_ OEMHPET0 12000823 M
SFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bffb6df0 0030E (v01 A_M_I_ POWERNOW 00000001 A
MD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 0000000000040fff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
[ 0.000000] #2 [0001000000 - 000163efa8] TEXT DATA BSS ==> [0001000000 -
000163efa8]
[ 0.000000] #3 [0037da5000 - 0037fef99f] RAMDISK ==> [0037da5000 -
0037fef99f]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
0000100000]
[ 0.000000] #5 [000163f000 - 000163f290] BRK ==> [000163f000 -
000163f290]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 -
0000013000]
[ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 -
0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-fff
f88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffb0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048383
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3824 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767976 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000
[ 0.000000] PM: Registered nosave memory: 00000000bffbe000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000bffee000
[ 0.000000] PM: Registered nosave memory: 00000000bffee000 - 00000000bfff0000
[ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec0
0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028200000 s85720 r8192 d207
76 u524288
[ 0.000000] pcpu-alloc: s85720 r8192 d20776 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag
es: 1030360
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sdc2 ro apm=off acpi=on quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4061208k/5242880k available (2862k kernel code, 1049348k
absent, 132324k reserved, 1870k data, 612k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.974 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 6030.11 BogoMIPS (lpj=10046580)
[ 0.003375] Security Framework initialized
[ 0.003380] SELinux: Disabled at boot.
[ 0.006737] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
)
[ 0.008758] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009739] Mount-cache hash table entries: 256
[ 0.009861] Initializing cgroup subsys ns
[ 0.009864] Initializing cgroup subsys cpuacct
[ 0.009867] Initializing cgroup subsys devices
[ 0.009888] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009890] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.009892] CPU 0/0x0 -> Node 0
[ 0.009893] tseg: 0000000000
[ 0.009902] CPU: Physical Processor ID: 0
[ 0.009903] CPU: Processor Core ID: 0
[ 0.009906] mce: CPU supports 5 MCE banks
[ 0.009914] using C1E aware idle routine
[ 0.009915] Performance Events: AMD PMU driver.
[ 0.009919] ... version: 0
[ 0.009920] ... bit width: 48
[ 0.009921] ... generic registers: 4
[ 0.009922] ... value mask: 0000ffffffffffff
[ 0.009923] ... max period: 00007fffffffffff
[ 0.009925] ... fixed-purpose events: 0
[ 0.009926] ... event mask: 000000000000000f
[ 0.010450] ACPI: Core revision 20090903
[ 0.017857] Setting APIC routing to flat
[ 0.018376] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.023333] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.023333] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.023333] ..... (found apic 0 pin 0) ...
[ 0.057779] ....... works.
[ 0.057781] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.059999] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.006666] Initializing CPU#1
[ 0.006666] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS
(lpj=10046283)
[ 0.006666] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.006666] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.006666] CPU 1/0x1 -> Node 0
[ 0.006666] CPU: Physical Processor ID: 0
[ 0.006666] CPU: Processor Core ID: 1
[ 0.150074] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.150094] Brought up 2 CPUs
[ 0.150096] Total of 2 processors activated (12060.03 BogoMIPS).
[ 0.150276] CPU0 attaching sched-domain:
[ 0.150278] domain 0: span 0-1 level MC
[ 0.150280] groups: 0 1
[ 0.150283] CPU1 attaching sched-domain:
[ 0.150285] domain 0: span 0-1 level MC
[ 0.150286] groups: 1 0
[ 0.150335] NET: Registered protocol family 16
[ 0.150335] node 0 link 0: io port [1000, ffffff]
[ 0.150335] TOM: 00000000c0000000 aka 3072M
[ 0.150335] node 0 link 0: mmio [e0000000, efffffff]
[ 0.150335] node 0 link 0: mmio [a0000, bffff]
[ 0.150335] node 0 link 0: mmio [c0000000, fe0bffff]
[ 0.150335] TOM2: 0000000140000000 aka 5120M
[ 0.150335] bus: [00,07] on node 0 link 0
[ 0.150335] bus: 00 index 0 io port: [0, ffff]
[ 0.150335] bus: 00 index 1 mmio: [c0000000, ffffffff]
[ 0.150335] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.150335] bus: 00 index 3 mmio: [140000000, fcffffffff]
[ 0.150335] ACPI: bus type pci registered
[ 0.150335] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.150335] PCI: Not using MMCONFIG.
[ 0.150335] PCI: Using configuration type 1 for base access
[ 0.150335] bio: create slab <bio-0> at 0
[ 0.153425] ACPI: EC: Look up EC in DSDT
[ 0.156528] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.162785] ACPI: Interpreter enabled
[ 0.162788] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.162809] ACPI: Using IOAPIC for interrupt routing
[ 0.162849] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.168173] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.173175] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.180141] ACPI Warning: Incorrect checksum in table [OEMB] - E6, should be
D9 (20090903/tbutils-314)
[ 0.180146] ACPI: No dock devices found.
[ 0.180241] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.183372] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
[ 0.183405] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
[ 0.183413] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[ 0.183416] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[ 0.183433] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.183437] pci 0000:00:01.1: PME# disabled
[ 0.183478] pci 0000:00:02.0: reg 10 32bit mmio: [0xdbeff000-0xdbefffff]
[ 0.183495] pci 0000:00:02.0: supports D1 D2
[ 0.183497] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183499] pci 0000:00:02.0: PME# disabled
[ 0.183518] pci 0000:00:02.1: reg 10 32bit mmio: [0xdbefec00-0xdbefecff]
[ 0.183539] pci 0000:00:02.1: supports D1 D2
[ 0.183541] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183544] pci 0000:00:02.1: PME# disabled
[ 0.183597] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.183623] pci 0000:00:08.0: reg 10 io port: [0xc480-0xc487]
[ 0.183626] pci 0000:00:08.0: reg 14 io port: [0xc400-0xc403]
[ 0.183629] pci 0000:00:08.0: reg 18 io port: [0xc080-0xc087]
[ 0.183632] pci 0000:00:08.0: reg 1c io port: [0xc000-0xc003]
[ 0.183635] pci 0000:00:08.0: reg 20 io port: [0xbc00-0xbc0f]
[ 0.183638] pci 0000:00:08.0: reg 24 32bit mmio: [0xdbefd000-0xdbefdfff]
[ 0.183661] pci 0000:00:08.1: reg 10 io port: [0xb880-0xb887]
[ 0.183664] pci 0000:00:08.1: reg 14 io port: [0xb800-0xb803]
[ 0.183667] pci 0000:00:08.1: reg 18 io port: [0xb480-0xb487]
[ 0.183670] pci 0000:00:08.1: reg 1c io port: [0xb400-0xb403]
[ 0.183673] pci 0000:00:08.1: reg 20 io port: [0xb080-0xb08f]
[ 0.183675] pci 0000:00:08.1: reg 24 32bit mmio: [0xdbefc000-0xdbefcfff]
[ 0.183713] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183715] pci 0000:00:09.0: PME# disabled
[ 0.183741] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183743] pci 0000:00:0b.0: PME# disabled
[ 0.183768] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183770] pci 0000:00:0c.0: PME# disabled
[ 0.183852] pci 0000:01:07.0: reg 10 io port: [0xdc00-0xdc7f]
[ 0.183857] pci 0000:01:07.0: reg 14 32bit mmio: [0xdbfffc00-0xdbfffc7f]
[ 0.183872] pci 0000:01:07.0: reg 30 32bit mmio pref: [0xdbfc0000-0xdbfdffff]
[ 0.183884] pci 0000:01:07.0: supports D1 D2
[ 0.183886] pci 0000:01:07.0: PME# supported from D1 D2 D3hot
[ 0.183888] pci 0000:01:07.0: PME# disabled
[ 0.183910] pci 0000:01:08.0: reg 10 io port: [0xd880-0xd89f]
[ 0.183937] pci 0000:01:08.0: supports D1 D2
[ 0.183958] pci 0000:01:08.1: reg 10 io port: [0xd800-0xd807]
[ 0.183985] pci 0000:01:08.1: supports D1 D2
[ 0.184008] pci 0000:01:08.2: reg 10 32bit mmio: [0xdbfff000-0xdbfff7ff]
[ 0.184013] pci 0000:01:08.2: reg 14 32bit mmio: [0xdbff8000-0xdbffbfff]
[ 0.184040] pci 0000:01:08.2: supports D1 D2
[ 0.184041] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot
[ 0.184044] pci 0000:01:08.2: PME# disabled
[ 0.184071] pci 0000:00:04.0: transparent bridge
[ 0.184073] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.184076] pci 0000:00:04.0: bridge 32bit mmio: [0xdbf00000-0xdbffffff]
[ 0.184096] pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
[ 0.184103] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.184109] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
[ 0.184113] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.184117] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdef80000-0xdeffffff]
[ 0.184163] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
[ 0.184165] pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
[ 0.184167] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.184235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.184373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.184459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.184507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.184555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.190308] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.190311] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 0.190466] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 0.190622] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.190776] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.190932] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.191087] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.191242] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[ 0.191397] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.191552] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.191716] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.191872] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.192027] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.192182] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.192337] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.192492] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.193458] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.193612] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.193796] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.193834] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem
,locks=none
[ 0.193834] vgaarb: loaded
[ 0.193834] usbcore: registered new interface driver usbfs
[ 0.193834] usbcore: registered new interface driver hub
[ 0.193834] usbcore: registered new device driver usb
[ 0.193834] PCI: Using ACPI for IRQ routing
[ 0.193834] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.193834] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.196695] Switching to clocksource hpet
[ 0.197566] pnp: PnP ACPI init
[ 0.197584] ACPI: bus type pnp registered
[ 0.201078] pnp 00:07: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0
(0x900-0x9ff), disabling
[ 0.201081] pnp 00:07: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0
(0x900-0x9ff), disabling
[ 0.204127] pnp: PnP ACPI: found 16 devices
[ 0.204129] ACPI: ACPI bus type pnp unregistered
[ 0.204140] system 00:07: ioport range 0xa30-0xa37 has been reserved
[ 0.204143] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.204145] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.204147] system 00:07: ioport range 0x500-0x57f has been reserved
[ 0.204149] system 00:07: ioport range 0x580-0x5ff has been reserved
[ 0.204152] system 00:07: ioport range 0x800-0x87f could not be reserved
[ 0.204154] system 00:07: ioport range 0x880-0x8ff has been reserved
[ 0.204158] system 00:07: ioport range 0xd00-0xd7f has been reserved
[ 0.204160] system 00:07: ioport range 0xd80-0xdff has been reserved
[ 0.204162] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.204165] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.204168] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.204170] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 0.204173] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.204175] system 00:07: iomem range 0xffb80000-0xffffffff could not be rese
rved
[ 0.204178] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved
[ 0.204182] system 00:09: iomem range 0xfec00000-0xfec00fff could not be rese
rved
[ 0.204185] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.204187] system 00:09: iomem range 0xfec80000-0xfec8ffff has been reserved
[ 0.204191] system 00:0c: ioport range 0x230-0x23f has been reserved
[ 0.204194] system 00:0c: ioport range 0x290-0x29f has been reserved
[ 0.204196] system 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 0.204198] system 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 0.204202] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.204207] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.204209] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.204212] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.204214] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserv
ed
[ 0.204217] system 00:0f: iomem range 0xff700000-0xffffffff could not be rese
rved
[ 0.209185] pci 0000:01:07.0: BAR 6: address space collision on of device [0x
dbfc0000-0xdbfdffff]
|
o que será que está errado? sempre compilei assim, e só tenho o tal problema a partir do kernel 2.6.31. No omnislash 2.6.30.9 (um dos últimos do kqx) não observei isso.
__________________
Você sabe o que é o SUS?
Você sabe o que é manter uma empresa com um custo entre 40 e 50% da receita bruta?
Você sabe para onde vai o Imposto de Renda?
Você sabe o que é depender "do que é público"
Você, caro político, não acha que tem bem mais o que fazer do que proibir a piada na imprensa?
|
pequena pergunta. colisão de recursos. kernel 2.6.32.2
. Nós temos 701.580 usuários, convidamos você fazer parte de nossa comunidade também! Se ainda não encontrou o que procura use nossa pesquisa. Esperamos que aprecie nosso trabalho.
